AI-Enabled Material Intelligence for Adaptive 3D Printing and Computational Architectural Fabrication
Keywords:
material intelligence; adaptive additive manufacturing; Bayesian optimization; process–structure–property modeling; closed-loop fabrication; computational architectureAbstract
Extrusion-based and robotic additive manufacturing can realize geometrically complex architectural components, yet most fabrication plans still fix process parameters before printing and treat material properties as homogeneous, nominal values. This mismatch is acute in computational architecture, where structural performance, buildability, and material gradients interact across layered toolpaths. The paper develops an AI-enabled material intelligence framework that represents fabrication as an uncertainty-aware mapping from process variables, local geometry, and environmental conditions to a spatially varying material property field. The framework combines physics-informed feature construction, surrogate learning of process–structure–property relations, Gaussian-process calibration for sparse regimes, constrained Bayesian optimization of process settings, and layer-wise closed-loop correction with projection onto admissible buildability and performance sets. It also specifies how structural design models and robotic path planning exchange material-state estimates so that computational form-making is conditioned on achievable properties rather than nominal ones. The main contribution is an integrated formulation that links material inference to optimization and control while preserving explicit constraints for strength, tolerance, failure risk, and fabrication time. The analysis identifies where data-driven prediction must be limited by physical priors and where uncertainty estimates alter decision rules. The framework provides a disciplined basis for adaptive 3D printing in architecture, with implications for material-efficient components, safer process selection, and traceable digital fabrication workflows.
References
1. Gibson, I., Rosen, D. W., Stucker, B., & Khorasani, M. (2021). Additive manufacturing technologies (3rd ed.). Springer.
2. Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143, 172-196.
3. Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015). The status, challenges, and future of additive manufacturing in engineering. Computer-Aided Design, 69, 65-89.
4. Wang, C., Tan, X. P., Tor, S. B., & Lim, C. S. (2020). Machine learning in additive manufacturing: State-of-the-art and perspectives. Additive Manufacturing, 36, 101538.
5. Qi, X., Chen, G., Li, Y., Cheng, X., & Li, C. (2019). Applying neural-network-based machine learning to additive manufacturing: Current applications, challenges, and future perspectives. Engineering, 5(4), 721-729.
6. Jin, Z., Zhang, Z., Demir, K., & Gu, G. X. (2020). Machine learning for advanced additive manufacturing. Matter, 3(5), 1541-1556.
7. Aoyagi, K., Wang, H., Sudo, H., & Chiba, A. (2019). Simple method to construct process maps for additive manufacturing using a support vector machine. Additive Manufacturing, 27, 353-362.
8. Rao, P. K., Liu, J. P., Roberson, D., Kong, Z. J., & Williams, C. B. (2015). Online real-time quality monitoring in additive manufacturing using empirical mode decomposition and extreme learning machine approaches. Journal of Manufacturing Science and Engineering, 137(6), 061004.
9. Rasmussen, C. E., & Williams, C. K. (2006). Gaussian processes for machine learning. MIT Press.
10. Chen, T., & Guestrin, C. (2016). XGBoost: A scalable tree boosting system. Proceedings of the 22nd ACM SIGKDD International Conference on Knowledge Discovery and Data Mining, 785-794.
11. Sanchez-Lengeling, B., & Aspuru-Guzik, A. (2018). Inverse molecular design using machine learning: Generative models for matter engineering. Science, 361(6400), 360-365.
12. Ramakrishna, S., Zhang, T.-Y., Lu, W.-C., Qian, Q., Low, J. S. C., Yune, J. H. R., Tan, D. Z. L., Bressan, S., Sanvito, S., & Kalidindi, S. R. (2019). Materials informatics. Journal of Intelligent Manufacturing, 30(6), 2307-2326.
13. Oxman, N. (2011). Variable property rapid prototyping. Virtual and Physical Prototyping, 6(1), 3-31.
14. Aage, N., Andreassen, E., Lazarov, B. S., & Sigmund, O. (2017). Giga-voxel computational morphogenesis for structural design. Nature, 550(7674), 84-86.
15. Luo, D., Chen, D., Wang, J., Zhu, G., & Xu, W. (2020). The smart robot crafting approach to computing materials. Construction Robotics, 4(3), 239-249.
16. Mechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., & Roussel, N. (2020). Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review. Cement and Concrete Research, 132, 106037.
17. De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I. (2018). Vision of 3D printing with concrete — technical, economic and environmental potentials. Cement and Concrete Research, 112, 25-36.
18. Carneau, P., Mesnil, R., Roussel, N., & Baverel, O. (2020). Additive manufacturing of cantilever – from masonry to concrete 3D printing. Automation in Construction, 111, 103062.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Journal of Intelligent Engineering Systems

This work is licensed under a Creative Commons Attribution 4.0 International License.